Tuesday, August 29, 2023

Two 15mm Sherman Calliope T34 Tanks

These are two 3D-printed 15mm Sherman Calliope tanks. I needed something to track available artillery missions for my O-Group Americans and these seemed the treat for that purpose. 

The files were free from a 1:200 scale armor pack which required I scale the models up, but they still look fantastic at 15mm (1:100). 

Turrets are magnetized. Decals are by Battlefront Miniatures. 

Not much else to say. 15mm vehicles in OD green go pretty fast on the painting table. These took longer to print than they did to paint. I'm loving my 3D printer for filling in such gaps in my collection as needed. Nothing like 'always available' inventory when you need it.

Sunday, August 27, 2023

Captured French Hotchkiss H-35 in German Service in Finland

This is a captured French Hotchkiss H-35 tank painted up in German livery. During the continuation war this was the most numerous tank type in German service in Finland. Even during the Lapland war many were still available. Dozens were also buried for use as pantherturm bunkers.


This is a 3D print from 1:100 scale files, scaled up to 1:56. There are scant few historical photos of these in use in Finland. Best research I could find suggested that Panzer grey was used in Finland exclusively as whitewash over it was used each of the long winters. Although some H-35s were used in Normandy in three-color dunkelgelb pattern, I could find no evidence that this was used in Finland. To support the all-grey scheme, police duty H-35s used in the east were fielded in all grey. There are numerous photos supporting this.

The STL files come with both French and German-modified turrets in both short and long barrel versions. I've chosen to paint up the German-modified turrets. The French ones may end up being turned into pantherturm bunkers later on.

Weathering on this model was by sponge chipping techniques, dry brushing and liberal coats of Vallejo European dust acrylic wash in multiple coats. Turrets are magnetized for ease of use.

Wednesday, August 16, 2023

Two 15mm Built-Up-Areas for Napoleonic through WWII Gaming

I made up these two 15mm BUAs primarily for use with the 'O' Group WWII rules. They can as easily be used for any 15mm gaming from Napoleonics through WWII. 

The farmhouse and stable were resin pieces pulled from my 'dead lead' box. I believe I purchased these about 20 years ago. The walls I 3D printed. All pieces were painted and glued to a custom laser-cut base. A trough and wagon were added. I think the trough was from Musket Miniatures and the wagon might be Essex. 

The small house and outhouse may look familiar to regular readers of this blog. This is a reduced scale of the "Small Italian Farmhouse" that I printed and painted in 28mm scale a few posts back. The outhouse was a free STL file and the walls come from the same STL pack that the house comes from. Coincidentally, these are the same walls that I used above in the farm complex.


Both pieces are designed to have some open space to accommodate a few stands of 15mm figures. Here's an 'action shot' of the farmhouse being garrisoned by some US infantry.

I'm counting these as two 'terrain/misc' in my annual painting totals.

15mm 3D-Printed Greyhound M-8 Armored Cars

Last Thursday I realized that I needed an M8 Armored car for my American force in an 'O' Group game I was hosting the following night. On my lunch hour I started the 3D printer on these three. An hour at the painting table after work finished them up. Liquid at noon, table ready after dinner. Bob's your uncle!

Three 15mm figures to this year's totals.


Monday, August 14, 2023

28mm Carthaginian Veteran Spearmen

These Carthaginian African veteran spearmen are Old Glory figures. I've painted them up based individually for Clash of Spears or Saga Age of Hannibal. I'm running a game of the former this upcoming Friday at our club's monthly game night as a way to drum up some excitement for the rules which I like a lot. Since our group also plays quite a bit of Saga, these are great for that faction in Age of Hannibal as well. 

Nobody makes Carthaginian transfers for Old Glory shields that I could find, so I created some myself using my laser printer and decal paper. The process is fairly simple, but it is laborious. To be completely honest, I'd rather buy transfers than make them. If they are available I typically just buy them. In this case, necessity was the mother of invention.

This group comprises 18 more figures for this year's painting totals. Next up on the painting table are a bunch of built-up areas for 15mm gaming, particularly WWII using "O" Group rules. Come to think of it, I owe the blog a post of the "O" Group game I hosted a couple of weekends ago!

Tuesday, August 1, 2023

3D Printed 28mm Small Italian Farmhouse

Quick 3D print and paint of this small Italian house. I intend to use it as a small farmhouse. I purchased the STL files for this as part of a larger set and I'm very happy with the purchase. More from this set to come.

One terrain/misc added to the annual painting totals.