28mm Macedonian Pike re-based

Just a quick post of 24 Macedonians with sarissa (pike) that I bought off of ebay, touched up and re-based for Clash of Spears. 

24 figures purchased, 24 figures re-based on my annual totals.
 

 

 

 

28mm Bavarian Chevaulegeres Re-Based

I purchased these figures from Ebay. They were nicely painted, but well used, severely worn, and had received significant damage in shipping. Although I've labeled this as a re-basing project, I also spend upwards of of a dozen hours repairing and re-painting every figure and every horse. In the end, they came out looking quite serviceable. They were painted in a 'toy soldier' style and I tried to keep true to that in the restoration efforts. Six bases re-based in the annual painting totals.

 

 

Last of the 28mm Finnish Infantry

I'm starting to come to the end of my 28mm Finnish Continuation War / Lapland War project. These are the last 'infantry' figures, including the gunners for the captured Russian 45mm AT gun. 

Remaining on the project are four vehicles, a T-34/76, a T-26 and two Komsolets artillery tractors. The latter 3-D reprints to replace the under-scaled ones I've already finished. 

 

This is a captured 45mm Russian AT gun. The Finns received a batch of these from Germany. Ter German designation was PaK 184 (r). Finland also captured several in the continuation war. I've painted this in flat green without the characteristic Finnish camouflage, as a majority of the in-theater historical photos appear to show it being used this way. The gun and crew are by Great Escape Games from their Iron Cross figure range.

Five Finnish combat engineers. These are converted Great Escape Games German engineers. I've done some head swaps and cherry-picked the figures with the least amount of characteristically German kit that wasn't given to the Finns. Helmets of course were donated in huge quantities.  These could also fit in as 'tank hunters' easy enough as most are carrying bundle grenades and panzerfausts. One figure also has an anti-tank mine. These will be augmented by my already painted flamethrower team.

I needed an engineer squad so I can use this army for Chain of Command. The CoC support points include flamethrower teams, engineering squads for tasks such as mine clearing and barbed wire clearing as well as full engineering squads.

 

Finally, the last dregs of the 'dead lead' box. This handful of infantry figures comprises the absolute last of the unpainted Finnish infantry figures I had. I was saving these few in case I needed an odd crew for an AT-gun, etc. While I was painting the AT-gun crew and engineers I figured I'd take advantage of economy of scale and get these finished up.

Total figures for the project - 13 figures and the AT gun.

 

Roman Re-Basing Project

I recently purchased the figures shown to the left from several Ebay auctions from a single seller. I was looking for a quick start on a Roman army for Saga and Clash of Spears. These figures were well loved, but arrived in good condition, although I wanted to re-base them on circular 25mm bases to be consistent with my other Saga and Clash of Spears figures. Due to transit damage and just normal wear-and-tear, nearly all of the figures had some touch-ups needed to bring them back up to snuff for tabletop use.

First up I tackled the allies. This unit of six Samnite figures also required I hand-paint one shield which was missing, lost in transit I believe. This is a unit for Clash of Spears, or a partial unit for Saga to be combined with figures in the below two units as 'warriors' in eight-figure units.

A second unit of allies, these are Italiotes, Etruscians, Campagnians, etc. A single unit of Warriors for Saga, or a large unit for Clash of Spears.

This unit, a mix of 'allied legion' Italiotes. A full unit for Clash of Spears, combined with Samanites above to complete a unit of eight warriors for Saga.

A unit of Triarii with white shields. Just under two units of hearthguards for Saga, or a large unit for Clash of Spears.

A group of red-shielded Triarii. This would make two and a half hearthguard units in Saga or likely two units in Clash of Spears.

The two mounted figures in this photo I've posted earlier. The four stands of foot officers can be used as warlord figures for Saga or officer figures for Clash of Spears. Clash uses single figures for officers, but the multi-figure bases take the guesswork out of knowing which is the officer and look better in my opinion. For game purposes each base will count as a single figure.

These were thrown in for free in the deal. They look more like Macedonians than Roman allies. Let's call them captured soldiers from Pyrrhus' army pressed into Roman service. They might serve as stand-ins for more Velites or even as filler for an allied legion unit.

Two very lonely Velites. I'll paint up some more from my unpainted lead collection to flesh this unit out.

The bulk of the Hastati and Principes, 15 with white tunics and red shields, 12 with red tunics and red shields, an officer, musician and an odd Triarii that got missed in the lot above. 

Here's a group shot of the above as well as previously posted ancient units for Saga.

Group shot of the bulk of the Roman infantry and officers. 

Project totals: 87 figures re-based, 87 28mm painted figures purchased.

28mm Minefields for Chain of Command

These are three 6"x6" minefields for use primarily with Chain of Command, which prescribes minefields of this size. They can also be used for other 28mm WWII games as well. While mines might not typically be visible, I find this representation to be quite recognizable by the players on the tabletop. The mines are 3D printed. Two of the bases are turfed MDF bases and a third, on thin clear acrylic for placing minefields across roads, or in urban areas.

These are minimally populated with terrain decoration to allow infantry figures to be placed on them. This would be appropriate should the mines represent anti-armor mines, or for engineering teams during the mine clearing process.

Still to come, barbed wire emplacements and road blocks also sized appropriately for Chain of Command.

28mm Finnish BT-42 Assault Gun

This is the Warlord resin model for the uniquely Finnish BT-42. This vehicle was made by adapting a captured BT-7 chassis by making a custom box turret large enough to hold a pre-war British 4.5" howitzer. 

Although intimidating in looks, in practice the overloaded chassis proved anemic in power, and the howitzer under performed in it's intended role. Also when pressed by armor, the HE gun was unable to take out enemy armor. Many of these were lost in 1943, with the remainder fighting on to the continuation war in 1944. Eventually all were replaced with German Stug-III and Panzer-IV tanks. 

I know these are of dubious value in a historical force, but I couldn't resist having one of these uniquely Finnish vehicles in my collection. 

 

28mm Finnish Weapons Teams

This is a collection of 28mm Finnish WWII weapons teams I finished up last week. It contains a mix of manufacturers and also includes a 3D printed Pak-40 gun printed by me using my resin 3D printer.

This set will go a big way into getting my Finnish army ready for some Chain of command Lapland War games as it fills out a lot of the support team options for Chain of command.

Left, a Pak-40 anti-tank gun, sold to the Finns by Germany for use during the continuation war against Russia. This was the same gun that the Germans used prolifically during the later years of the war.

On the right a Pak-97/38. This was made by slinging a pre-war French 75mm cannon to ah Pak-38 gun carriage. These bastardizations were an improvisation used during early encounters with T-34 and KV-1/2 tanks. Pulled out of front line service, many where shipped to Finland as a stop-gap solution while Pak-40 guns were manufactured to send there.

Three panzerschreck teams. Armed with the German-provided 88mm shoulder-fired anti-tank rocket system. The Finns used these as one of their primary anti-tank solutions in the Lapland war. 

Maxim medium machine gun and 60mm mortar teams.  The Finns received precious few MG-38/42s from Germany and made do with copious Maxim guns captured from the Russians during the Winter war. 

The 60mm mortar, while not overly plentiful, supplimented 80mm and 120mm mortars, primarily also provided by the Russians during the Winter War as captured trophies. 

Three LMG teams using captured Russian DP-27 'record player' LMG's. Named due to the shape and size of it's round magazine. This gun was similar to the well-known British Lewis gun in how the magazine worked, although the size of the magazine was much more comical in size. Still in use in low numbers in the Russian invasion of Ukraine in 2022/3, the Finns much preferred this to the domestic Lahti-Saloranta M/26. The latter being available in insufficient quantities.

 

Finally a flamethrower, the Finnish Liekinheitin M/38 was an improvement over Italian and German designs of WWI. It had a rifle stock for the flame projector and was capable of ten 'bursts' with a range of up to 120 feet. This will be used in Chain of Command as part of a 3-man flamethrower pioneer section or as two figures in a full engineer platoon. 

This adds 25 figures to my 2023 totals. I'm not sure how to count the two AT guns, they're not vehicles or figures, so I'll leave them out for now.

28mm BA-6 Finnish (captured Russian) Armored Car

During the winter war and continuation war the Finnish army captured several BA-series armored cars, among them several BA-6. The Fins, having none of their own, were quick to slap some Finnish markings onto these and press them into service. 

This is the Warlord Games resin model. The BA-6 is essentially a T-26 turret on an armored car chassis. Crew of four with a hull mounted medium machine gun and a 37mm anti-tank gun in the turret.

 

More 28mm WWII Finnish Infantry

Here's another batch of 28mm Finnish WWII figures for my Bolt Action / Iron Cross Finnish army. I'm ramping into second gear on this project as the army is approaching critical mass to start using it to run some games. 

These 18 figures are primarily to bulk up my infantry squads. Where previously I had focused on having an LMG with each squad, I've since found out that by the Lapland war, sections often fielded two or sometimes even three SMGs. These were a mix of Finnish and captured Russian PPSh models.

The officer: The Finnish officers loved their leather field coats. Brown was the typical color. I have previously erroneously painted some of these as grey wool, but this is the correct color. I'm actually considering going back and fixing that error on my other Finnish officers.

 

The Molotov throwers: For me, every Finnish squad should have one of these guys. In practice, I'll also use them as additions to a 'tank hunter' squad when a scenario calls for it. Two poses, but thanks to the swap-able heads, three unique-ish figures.

The Riflemen: There are a lot of one pose in this set, thanks to the limited range of figures from Warlord Games and the fact that I purchased two boxed sets and an additional squad. The upside is, I don't have many of this particular pose in my existing squads. I guess they all rattled to the bottom of the 'dead lead' box. Mixing them in existing squads should make them less repetitive. 

The Brrrrrt! :  SMG gunners in several poses. I've even tossed in some conversions from some French Partisans with head swaps for some variation. Still one pose is here as a set of three. Again, mixing them in existing squads will help. 

The Collection: Here's a group shot of the Finns so far. On the workbench are crew for the Pak-40, a Pak-38 and crew, another HMG, several LMG teams, a flamethrower and a 60mm mortar and crew. That should mostly round out the infantry and support teams for the army and free me up to finish the remaining vehicles. 

I also have a few combat engineers / pioneers on the way for use with Chain of Command.